Description
Sierra’s Fuel Fix is a highly concentrated additive for the elimination and control of bacteria, fungi and water contamination in fuels. Utilising the latest in microbiological controls and surface active agents, water and biological contamination is harmlessly dissolved and dispersed into the fuel, and subsequently burnt off.
Bacteria and fungi such as the common air borne spore Cladisporium Resinae appear as dark “sludge” like particles in the fuel reservoir. At their worst this “sludge” can amount to large lumps or mats. Unlike the many biocide treatments that are on the market that are only designed to kill bacteria, not remove and are of no use in removing water, Fuel Fix will remove the entire problem.
Fuel Fix can be safely used with diesel engines that run a particulate filter, in fact it will improve the efficiency of particulate filters, by dissolving any occurrence of the diesel bug.
Fuel Fix will not affect seals, hoses and fittings within the fuel system. Regular use will eliminate problems associated with condensation, and prevent further biological growth from occurring.
Benefits:
- Improved fuel economy
- Smoother acceleration
- Improved power
- Improved fuel flow (especially through filters and injectors)
Left untreated, moisture in the fuel tank will eventually cause corrosion, leading to even more problems.
Directions:
- It is recommended that an initial dosage of 2 litres be added for every 1000 litres of fuel in order to properly purge the fuel system of any and all pollutants.
- After that, the future regular dosage might be lowered to as little as 1 litre for every 4,000 litres of fuel. When the ratio reaches 1:4000, the purity of the fuel will be preserved, condensation will be absorbed, and biological growths will not be allowed to form.
- In situations in which the growth of bacteria or fungi is preventing fuel from moving through the system, a maximum dosage of five litres may be supplied for every one thousand litres of fuel, if necessary.
- Before adding any gasoline, you need always add Fuel Fix first. There is no exception to this rule.
- In order to prevent the filters in the system from becoming clogged during the initial dose, it will be necessary to clean or replace them more frequently. This is because Fuel Fix will work to eliminate the “bug” that is already there.
- Make sure that every feasible effort is made to drain the large amounts of water first (where possible).
- It is only necessary to deliver initial dosage rates in the event that contamination is present. Please use the maintenance dosage rates if you are taking this as a preventative strategy.
* 20L Treats up to 80,000L
